Our Products
Enhancing the prowess of Ozone through product research and development
Our Products
Enhancing the prowess of Ozone through product research and development
Dissolved Ozone Sensors
Robust and accurate inline and portable dissolved ozone analysers
Inline dissolved ozone sensor
The pureO3 dissolved ozone sensor provides rapid and accurate measurement across a wide range of ozone concentrations. It uses Intelligent Sensor Management (ISM) technology to provide predictive diagnostics for low-maintenance, in situ measurement.
| Specifications – Dissolved Inline Ozone Sensor Pureo₃ | |
|---|---|
| Operating Rage – Short Term | 0 – 5000 ppb (µg/L) |
| Operating Range – Continuous | 0 – 500 ppb (µg/L) |
| Response time | 90% Response in 30 Seconds |
| Sample Pressure (Metric) | 0.8 – 3.0 bar |
| Sample Pressure (Imp) | 0 – 45 psig |
| Sample Flow Rate with Housing | 200-500 mL/min |
| Sample Flow Rate without Housing (Metric) | 0.15-1 m/s |
| Sample Flow Rate without Housing (Imp) | 0.5-3 ft/s |
| Connection Type | 1/4″ NPT(F) |
| System Accuracy | ±1% of reading or 0.4 ppb, whichever is greater |
| Sanitizable | Yes |
Portable Dissolved Ozone Sensor
DO3 is a rapid, simple to use device for checking the ozone concentration in water and is calibrated in mg/L (same as parts-per-million by volume in water). This small, battery-operated detector offers an inexpensive alternative to more costly inline monitors and requires no disposable reagents.
Specifications:
- Size: 3.13 x.1.56 x 1.36 inches (79.5 x 39.6 x 34.5 mm)
- Weight: < 2 ounces (49 grams)
- Range: 0.00 – 2.00 mg/L (ppm in water by weight), display indicates to 5.00 ppm, accuracy above 2 ppm is not implied
- Recommended water temp: 20 – 30 C (68 – 86 F)
- Operating Temp: 0 – 40 C (32-105 F)
- Accuracy: Within 20% when operated near room temperature.
- Response Time: 5 minutes to take final reading, but >90% value available on display after 3 minutes.
- Alarms: Buzzer
- Sampling Method: Gaseous Diffusion
- Interferences: Dissolved Chlorine
- Display: Digital LCD in increments of 0.01
- User Interface: Single button
- Tests: Self-Test on startup checks circuitry, alarms, battery, and operating temperature.
- Calibration: Recommended at least 1x per year, or whenever accuracy of reading is critical.
- Sensor: Transducer Technology T-Series electrochemical (3ET1PO3)
- Battery Information: Battery check on startup and during operation. User replaceable CR2450 coin battery.
